Materials

• Brass SAE #360 or equivalent free cutting, principle compound. Components are nickel chrome-plated on the inside and out side and have a uniform high luster finish.
• Ball and socket type connector facilitates installation and allows angular adjustment in any direction up to 50 degrees from center. Unique design prevents accidental blow-offs.

  Features & Benefits

• Raised knurled sections for easy hand installation. NO TOOLS REQUIRED.
• Fits all standard 1/2" threaded shower arms. (Adaptors are available to retrofit obsolete ball-type shower arms.)
• Comfortable conical spray is maintained at pressures as low as 10 psi. Width of spray can be adjusted by reversing the spray disc.
• U.S. Manufacture with 20 year guarantee.
• Showerheads have volume control valve that allows users to reduce water flow during consumption while maintaining hot/cold mixture.
• Flow rates do not exceed 2.45 gpm at 80 psi in full open position.
• Meets and exceeds California Energy Commission standards, ANSI A112/19 I/M 1079 military, and federal, state of California, Connecticut, Florida, Massachusetts, New York and Canadian specifications.